Irrigation, Tulsa, how to winterize a sprinkler system and prevent freezing. Unless you live in one of the South or Southern most regions of America, chances are there’s no need to irrigate your lawn by the winter, but simply shutting down their, your sprinkler system isn’t enough. You must also complete the drain, the water, the system to prevent it from freezing, expanding and cracking your underground pipes. Learning how to protect your sprinkler system from freezing isn’t rocket science, but it is still worth thinking twice about whether you do it yourself or not with Irrigation Systems Tulsa.
Consider hiring a wa winterization pro Irrigation Systems Tulsa lawn sprinkler. Your winterization can be relatively quick, do yourself job, but there are a few reasons why you may still want to spend the money to hire irrigation maintenance professional for this one. First irrigation Tulsa at first. The winterization process requires a fairly prehensile of working knowledge of your specific system, including the layout of each irrigation zone.
If you don’t know your system, while it’s good to have a trained eye looking over the process. Second, the blow up process which most systems will require, can cause damage to system com components. If it’s not performed properly and finally blowing out a sprinkler system requires a fairly powerful air compressor, which most homeowners don’t have in their garages. These can be rented.
A two cubic foot per minute model is recommended, but if you’re already going to the expense who might be able to hire the pro for not much more Irrigation Systems Tulsa, Tulsa draining sprinklers on a slope, not all systems need to have their water blown out of them. You can winterize the sprinkler system without an air compressor. If all of your irrigation lines are buried at a slight downs heel slope, simply shut off the main water supply to your system and open the drain valves at the end of each zone.
Once all the winter Wallner has trickled out, replace the caps and open the stops to waste valves in the valves of the backflow device to drain the remaining water irrigation Tulsa automatic sprinkler draining. If you have a high end sprinkler system, your irrigated pumps for automatic draining, you should follow this specific instructions for your system as indicated in the operations manual. This process can usually be in Tyndall from the control panel irrigation. Tulsa, how to winterize your sprinkler system, the blow of method. If you decide to forego ahead on your own with the blot method, you’ll need to gather a few supplies and air compressor as mentioned above, preferably at 10 cubic feet per minute module irrigation Tulsa. You’ll need a quick connect hose adapter that can be connected to the compressor hose, to the blowout port of your sprinkler system, walkie talkies or phone.
You may also need to help her if you can’t see your entire system from your location on the blowout port because it is important to shut off the air comparator as soon as all the water has been blown out. This may mean you need a pair of walkie-talkies or a cell phone to communicate eye protection. Everyone involved in the process should have eye protection on irrigation. Tulsa began by closing the main supply, Val, as well as all the valves or the either side of your system’s backflow device, which will protect it from damage caused and composed air. Make sure your compressor hose valves and close there move the cap on the blowout port. Can you use your quick connect adapter? Can connect the compressor hose to the port irrigation Tulsa. Next, adjust the pressure gauge and the air compressor to 80 PSI. If you have a PVC pipe system or 50 PSI, if you have a polyurethane pipe system exceeding these maximums could cause the pipes to crack. Be sure to call us for the best Irrigation Systems Tulsa.
You’re now ready to blow out the pipe zones by zone. Start with the zone fat farthest away and open the drain valve at the end of the line. You use the control panels to open the zone, only to put your eye protection. This goes for your spotter too. If you have one just in case you accidentally pressurize the line too much and pop off one of the sprinkler heads. Irrigation, Tulsa slowly open the air compressor valve to begin blowing in the air into the system. You or your spotter should see water coming from the zone straight.
Well the squeaker heads themselves. As soon as the water stops flowing, close the compressor valve. Failure to do so can cause your sprinkler head gears to spin so fast they could melt when all the water is out of the line. Close the drain valves and at the end of the zone and move onto the next closest zone.
Irrigation Tulsa after you purged every zone, open the backflow device vowels and stop and waste valves to drain whatever water remains between your main vowels and backflow device. The system should be dry now, but you’re not quite finished irrigation. Tulsa protect your sprinkler system for winter. There are a few more components of your system that may need protecting most notable your main valve. There’s water sitting right behind it and some of this probably is a small section of pipe that is exposed to the elements wrapped the length of the pipe and insulated foam and secure the zip ties. Then tie a plastic bag over the entire valve. This will help prevent it from freezing low winter temperatures, Irrigation Systems Tulsa, Tulsa. If your system is equipped with removable pumped, it is also best to completely disconnect the pump and bring it inside for the winter. The pump may be located under a cover and an underground pit.
If there is a fully irrigated pump, cover it with a plastic bag or insulation blanket Irrigation Systems Tulsa. Tulsa finally shut down your control panel for winter. You can disconnect the power source completely or if your system has a winter off shutdown modes. Switch it to the setting. Consult with your control panel user guide. If you’re not sure. Irrigation, Tulsa irrigation Tulsa. Give us a call today at (918) 237-6181 give us a call and we’d love to help with any and all of your sprinkler repair needs. Mo check. Non electrical control matters. Nat non electrical sprinkler control valves must be open district water when a fire occurs if the valves are closed and the firebreak Sajid is like not having a sprinkler system in place. Building owners should check non electrical control vows weekly to ensure that they are open. If your building has electrical control valves, they can be tested during the full sprinkler system inspection that should be performed annually. Irrigation, Tulsa, if you need help checking your control valves in the building. Sprinklers request an inspection from a fire service professional trained in Marshall sprinkler system inspections. Firefighters can learn the sprinkler system inspection and only and other types of fires. Suspicions, systems inspected by studying irrigation, Tulsa living water, irrigation, irrigation, Tulsa. Give us a call today.