When you have sprinkler issues in your lawn and need the best Sprinkler Repair McKinney, you know the one that you spent so much time, money, and all the energy to get it to look so full, green and vibrant. You need to call a professional quickly! Especially in areas where there are laws that govern how irrigation is done. However, technically it is okay for a homeowner to work on their own system in most states. Lets just talk about some of the common issues and how to spot them, that way you will know when to call for help and avoid too much damage to the beautiful lawn.
Let’s talk about leaks. Leaks can be tricky depending on what’s leaking or where a leak is at. That in itself, is the first trick! Where is the leak and what is it that is leaking. If a sprinkler system is installed properly, this makes things hopefully, easier on the Sprinkler Repair McKinney team. If it wasn’t, or is an old system, this can be harder to solve.
First thing you do is test to make sure your leak is irrigation related. This may be obvious because you already know where the leak is but if it’s not, maybe you got a water bill that was super high. Some cities will call you if you have had a continuous flow of water for a certain time. You want to shut the water off, and search the house and yard for signs of water and call a professional immediately to ensure no more water is lost and there is less damage to the lawn we have set out to protect.
Let’s say one day you notice a certain part of the yard is dry and all the rest are green and nice. This is a lawn care emergency! Call for help immediately. We need to get water to that grass as soon as possible. What’s the problem? Well, first off there is an issue with a valve. Each zone has its own valve. They are like gates that control the flow of water. So we run the system and see what it does. There are many things to watch for like, how many zones did not run, or did the zone try to run but there is low pressure, did multiple zones not work, the list goes on. The hardest part is when you can’t find the valve that’s in question.
When you think about a sprinkler system, it doesn’t seem hard. There is a water source from the main water line. There is a series of valves that control the water that are controlled from a controller or app. Then there are the sprinkler heads or whatever type of emitter you have. Yet, still a lot of times determining or resolving an issue can be hard without a professional.
If you’re gonna spend time, money and energy to get your lawn to whatever place you like. Then you have to make sure it gets the water it needs. The best way to do that is by having an irrigation system set up and designed properly and that is tuned and well maintained.
My first suggestion is to know how to find every valve or all the valve boxes. This trick is the easiest way to save time and money, possibly on my whole list. Call a professional and have them all located for you. This may cost a little money, but it will pay for itself.
So let me say, a sprinkler system is a connection to the main water source leading to an isolation valve and a backflow. A backflow is something that is required but most cities nationwide. This Sprinkler Repair McKinney device prevents any water that has passed into the system from flowing back to clean drinking water.
From the backflow, water travels to the valves. There can be a master valve as well. To check quickly if you have a master valve you can look at your controller. Valves are like gates. If there is a master, just think that water starts at the master gate. When the master gate is opened, water will fill the rest of the gates.
Then one by one as the controller says, each gate will open. From the valve you have sprinkler heads, or some type of water emitters. That’s it! You have a controller that controls all the valves by the wires running from the controller to the valve top.
Valves can be the center of a lot of common issues which is why you should always know where each valve is. If you have the system installed, always make sure to notate where the valve boxes are. Make sure to keep them clean from debris and don’t let the grass grow over them.
Typically they are round or rectangle green lids. Most companies will charge you to look for them separate from the time spent to solve the issues. Knowing where these are at helps troubleshoot much easier and quicker. Sometimes if a valve can’t be found you have to install a new one which can cost a lot more for the fact you have to find when the new valve can go and where you can get water to where it needs to be.
Make sure your system is tuned and designed for you and your needs. There are several reasons a system can be out of tune. Maybe landscaping has changed, throwing off the designed system. It’s important that you maintain the system to ensure it has the right coverage in the right places. Too much or too little water can be bad for your lawn.
The best advice is to sign up for a service plan. A service plan ensures a professional is walking through your system regularly. Taking all the stress and worry away from you while you focus on other things. Keeping up with a lawn can be hard work especially after a long day at work.